|
 |
More Ice Ice Ice Pictures!
|
The fireplace below has Starfire and Ice
 
 
 
The fire pit below has a clear base with 1/4" starfire and 1/2" starfire, Yellow Amber Topper. Cobalt Blue Topper and Emerald Green Topper. The earth as the back yard and a lot of friends, wow!
 
 
 
The fireplace below has black, black reflective and ICE on top
 
 
The tables below were made for the Marriott in Boise Idaho
Marriott Hotel Boise Idaho
This is a pro-to type fire table that when finished will be wrapped in wire and finished in smooth high heat concrete mix with a 48" fire bowl in the middle. There will be a 6" brushed metal finished edge to cover under table lights. The table is 60" wide and 24" tall. These will be delivered to Boise Idaho, Marriott Corp. We will post finished pictures as soon as we can.
A brushed finish 8" edge was added along with a touch sensor to turn the lights on under the table. It is a 3 position sensor (high, medium and low).
Now the high heat concrete is applied and shaped.
As it turns out there is a 36" triple ring under the lava rock and we are down sizing it to a 24" double ring. As you can see when the wind blows the fire get a little bit close to the edge.
If you had a drink near the edge it would be a little bit warmer now. The sides will be dropped about 3 inches and the center raised about 3" and a 24" ring will finish it off. We will post the pictures of the glass and ICE when it is installed in a few days.
Here are the finished table pictures
We use clear base with lots of our ICE ICE ICE!
  The fireplace below is a vent less with a steel pan and a stainless face added to cover the controls. The glass is azurlite with ice ice ice. Ahhhhh the beauty of no logs! Really!
 Can you honestly say logs look good? The fireplace below has starfire and ice ice ice installed with a really cool ceramic tile on the face. Nice job!
        
The fireplace below has bronze, bronze reflective, Ice, gold and yellow amber topper. This fireplace is in Shawano, Wisconsin at the Cotton Patch Restaurant. E mail Patti and tell here you saw her fireplace. Now for the after pictures! This was a custom propane burner which was under all of the glass!
This is what Patti had to say:
Hi Ed,
Well, it's been about two weeks since I installed the new fireplace, and it is the talk of this sleepy little town. Because of the "ice" on the top, it has been nicknamed the "Fire and Ice" fireplace. I just placed an order for a pound each of 1/4" gold, yellow amber topper and clear ice. I think it needs a smidgen more color, and since the ice is the big feature, I decided to add a little more. I have to say, I didn't think I would like the ice, but it looks amazing!
Thank you Ed and Jimmy for all of your help and hand holding over the past few months. I will take more pictures when I add the new products.
Thanks again,
Patti
The fireplace below is a propane burner, self installation with the 2" method, starfire and gold on top
 
Above we have the old burner with a smaller flame pattern which we will change to a double burner in our tray propane pan burner
 
A little bit of cleaning with a wire brush and 1200 degree paint
 
We filled the bottom with pea gravel and the covered it with sand
 
Then we installed the propane burner and filler it with pea gravel to the top of the burners
 
You can see the pilot light and thermo-coupler exposed
 
So there it is. A clean burning propane burner, 2" method, no soot, no smells, no carbon monoxide and it puts out a tremendous amount of heat. We sell the 2" method because it works and if anyone tries to tell you different, they need your money more than you do. We are the only company building propane burners for glass that don't soot or smell!
The fireplace below has Bronze, Bronze Reflective , Ice Ice Ice and Clear Diamonds
The Fire pit/ Fireplace is in the entry, pretty cool.
This is a self install with a clear base, lagoon topper, pale emerald green topper and ice
above the burner goes in
below the lava goes on the burner. Then magically the lava disappears! We use the 2" method to save money not gouge the customer as we here this everyday how customers are taken by BS!
    
The fireplace below is in San Diego, California and the colors used were:
Cobalt Blue Topper
Steel Blue Topper
Cranberry Pink Topping
Purple Topper
Lilac Topper
Deep Royal Topping
Clear Base
Solex and Solex Reflective
Azurlite and Azurlite Reflective
Blue Green and Blue Green Reflective
and a little bit of Ice Ice Ice on top
wow!
The end pictures show that the burner was too close the wall which was an easy fix by moving the burner forward.
This is where is went a little bit wrong, oops. We just had them move the burner forward and now its fine and the back wall was repainted.
The unique display of ICE is just that, cool.
You have to admit, our ICE looks like ICE! Another creative idea.
The fireplace below is a propane vent less self install by Norm. The colors used were: Starfire base, Cobalt Blue Topper, Pale Cobalt Blue Topper, Ice Ice Ice, Pale Gray Topper, Gray Topper and Copper Blue Topper.
We use a piece of stainless steel in the front to contain the glass to cover the burners and keep the glass level.
The fire pit below has azurlite as a base and ice on top making the letter Y
     
The fireplace below has a starfire base with ice on top, pink diamonds, pink drops, clear diamonds and a splash of gold for added color. What make our company different is what we have to offer you as a customer, selection and variety!
 
Here is what the customer had to say:
From: ROD WILL rodwill1@msn.com
Sent: Sunday, December 17, 2006 7:38 AM
To: Ed@Moderustic.com
Subject: My new fireplace
Ed we love our new fireplace!!
Wow, it is awesome and couldn't have been easier to set up. Made the
purchase late friday and it took me approx 2 hrs Saturday (while watching
TV) to set up properly including paint and clean up.
I did run into a small problem with the material continously falling out of
the fireplace . It seemed that I actually used too much material. I was able
to resolve the problem by utilizing the original glass door frame as a
decorative and very functional stop. It is held in place with clear silicon
and the material was allowed to contact and dry into the silicon. ( see pics
) In my case this worked out well as my accent color is gold and so is the
trim piece of the frame. I imagine this can be done on many fireplaces and
the trim can be painted is needed to match. Feel free to use our pictures or
the idea about the trim ( if it is original ) on your web site or sales
presentations.
Thank you again
Rodney & Therese Williams
Rialto Ca 92377
 
 
 
The fireplace below is a propane self build and installed by Norm Oppliger in St. Louis. It has a 1/4" starfire base with 1/2' starfire on top and topping with:
Light Aquamarine topper
Turquoise blue topper
Cerulean Blue topping
Copper blue topper
Scarlett topper
Ice Ice Ice
and a few of our diamonds
one great propane self install Norm!
I finally managed to finish the fireplace. We have decided to place a 2" piece of metal in front (which hasn't been done yet), though, to keep the glass off the ledge. We thought it would be deep enough, but that didn't quite work.
To enable me to keep the center area smooth, we had to place the burner on top of the wall pipe, which created a rather high burner placement. This ended up creating a bit of a problem because I had a steep slope to the hearth. This is why I need to add the metal strip in front--so the glass doesn't roll down and come out of the fireplace. We had decided to not have a glass door on it, although if we find something we really like, that could change.
The pics might come in 2-3 e-mails, but I'll describe them here. The first few pics are duplicates of ones I already sent you.
1. Original fireplace, emptied out.
2-3. After painting with the dark blue from the chart you guys gave us. The wall was painted to match, although, I'm not sure I really like it. I'm trying to reserve judgement until I see it for awhile.
The damper handle is a brass duck head which wasn't even noticeable when it was all black.
4-5.New burner in place. This created more problems than expected due to the wall pipe being higher than most. We ended up using regular lava rock, since we couldn't find the smaller rocks. Then we added small pea gravel to fill in gaps around the lava rock. After the burner was finally level, we added the sand.
6. Testing the burner with sand added.
7. Clear glass base added.
8. Rest of colors were added--starfire, azurlite, cranberry-pink, with a little steel blue topper and a few ice cubes.
9-10. All finished and burning.
We're still working on the right side of this wall which has cabinets holding the TV and storage. Once the entire wall is finished, I'll send you one final pic of the entire wall. Not sure how soon that will happen, so don't wait for it, if you want to post these pics on your website.
I want to thank you for all your help. Your store was great to visit, so we could pick our glass out in person. Your staff was very helpful and we had a great time making our final color choices. I'll will definitely recommend you to others.
Senior Instructor for Art Clay
PMC Certified
crafterjudi@yahoo.com e mail any comments or questions to Judi
 
 
 
 
 
The fireplace below is in Mexico where we seem to be
sending more and more propane burners and glass for the new homes being
built there. The fireplace below has a black base glass with ice ice
ice on top of one of our propane pan burners. Which later a remote
control was added by the custom that we sent to them. The fire pit below has azurlite, 1/2" azurlite, Ice Ice Ice, starfire and platinum in the center. Lava rock was used to minimize on the use of glass to keep it in the budget. The fireplace below is in Glendale Hills California. We installed starfire
as a base with about 1 lb of Ice Ice Ice on top. Then to finish it off
we installed a brass surround with bronze frosted glass. The customer
loved it! She is the CEO of Fredrick's of Hollywood! Awesome house by the way. The
fire pit below is a new product line from TC, one of our newest
dealers. These come with a fibre optics feature, fire and water feature
included.The glass that was use was a clear base with Ice Ice Ice and a
splash of dark red orange topper, copper ruby red topper and several
diamonds through out for a pretty nice look. We will have pricing on
these as soon as we start to distribute their newer products.
The fireplace below is in Beverly Hills California.
We use a black base glass with Clear Ice Ice Ice on
top. The customer wanted to use their original burner to keep the
flames localized in the center area. This fireplace goes from "Log
Ugly" to very nice and contemporary in about an hour. If you really
take a look at your fireplace place in the beginning it almost looks
like an incinerator for long ago.
Not very nice? Nice Logs? I don't think so!
Now it's painted and ready for the glass.
A black base glass and 5 lbs of our Ice Ice Ice.
You can't see the Ice on still pictures but what it
is doing like looking into a spoon, it reflects backwards and appears
to be melting. Ask for a sample and you will be amazed.
The fireplace below has a starfire base with citrine, dark red
orange, and orange topper with a touch of our Ice Ice Ice. This was a
complete remodel in natural gas and a remote control was added with a
pilot light 
The
fireplace below is a before and after and a "how to" make it low and
lean. A more contemporary look. This is a self install by Rich Kamins and one very nice job!. He used a bronze and bronze reflective base glass. Topper with a bit of starfire. Ice Ice Ice and about 2 pounds of copper ruby red topper for a splash of color. Typical nasty fireplace before Moderustic!  
A few bricks and some drywall 
Some sand under the burner for filler to raise the base glass. 
And here you have one nice finished fireplace. 
The
fireplace below is a typical peninsula direct vent fireplace. A simple
conversion. We used a bronze base with gold on top with Ice Ice Ice and
Clear Diamonds and Pink Diamonds.
|
"Utility Patent Applications now Published as of June 2005 and May 2006"
We are still in Patent Pending
We take pride in our new product and take Patent Infringement very seriously! There are several companies who have copied our product and or process and they will be in for a surprise when our patent number becomes available to the public.
Please take note that in the United States reasonable royalties begin to accrue when a
Patent publishes, (as ours has in June of 2005 and in May of 2006) depending on the state of the patent application at the time of issuance.
Please take note that we do intend to enforce our patent rights to the furthest extent
of the law upon issuance of our patent.
Patent publication available on request. Don't be fooled by look-a-likes or overly expensive imitations, ask for Aquatic Glassel by Moderustic. Be sure to get a price quote and you'll see the difference.
We are now designing a national catalog which should be 30 to 50 pages! We are asking for your help in acquiring pictures of fireplaces and fire pits for our catalog that our glass was used in. We would also appreciate your comments and or feed back as well. Please send your e mails and pictures to:
Ed@Moderustic.com
Jaunzemis@msn.com
Copyright 2005 www.Moderustic.com All Rights Reserved.
Copyright 2005 www.AquaticGlassel.com All Rights Reserved.
Click here to view our website's sitemap!
|
Any questions please contact us at:
Phone: 909 989 6129
Fax: 909 944 3811
E Mail: Ed@Moderustic.com
Stop by and visit our Showroom in Rancho Cucamonga:
Moderustic Inc.
9467 Ninth Street #D
Rancho Cucamonga, California 91730
CSLB# C-17 693887
We are 2 miles north of the Ontario Airport
Hours: M-F 8:00 to 6:00 Most Saturdays 10:00 to 2:00.
After hours appointments available on request.
If you're coming late, please call and we will wait.
We at Moderustic and Producers of Aquatic Glassel and the inventors of Fireplace Glass, are proud to offer the consumer over 450 products and we know we have spawned a few undesirable competitors in the market place but we continue on our quest for betterment and greater success through you the customer. We have been criticized for offering the crushed lava rock and or filler method by all of these other companies. But we understand the wants and needs of the customer, you. Spend less and get more. Some of these companies are telling the consumer to not use filler, why? They only want to fill their pockets with your money and we want you to save money. We know we have devastated these companies with our filler saving methods but it is with the best intentions for the consumer in mind. We have refused to sell to these individuals and companies because of their business practices. So please understand their intentions when they want you to purchase more glass. We take pride in our new product and take Patent Infringement very seriously! There are several companies who have copied our product and or process and they will be in for a surprise when our patent number becomes available to the public and they will find their business in ruin. If you are a previous or new customer and would like to add your comments on these companies or your experience, we will post a testimonial page for these to be read by the public. If you would like to post just your comments, they are welcome as well. Again, we work for the consumer and not the competition.
|
|
|
|
|
|
|
|
|
|
|
Moderustic Return Policy
- Returns must be made within 30 days of purchase with exceptions only by management.
- Returned products must be unused and/ or unmixed.
- Returned products must be packaged well to avoid damage in transit, OR YOU WILL BE RESPONSIBLE FOR THE DAMAGE.
- Returned products that are damaged in transit will not be able to be refunded.
- Refunds will be made towards product cost only.
- Refunds will not be given for non-product labor costs (consulting fees, installation fees, labor, shipping etc.)
- Restock fees may apply depending on which items are being returned. (10% to 70%)
- Refunds are processed after customer’s review and acceptance of refunded amount.
- Refunds take approximately 1 week for processing less any customer delays.
- Any return must have a return authorization in writing by the management and this will be noted.
- There are no returns or refunds on any custom metal products what so ever!
- We are not responsible for local codes and or if any of our products are or are not approved. Please check with your local building department or governing agencies for proper approvals before purchasing. Custom build or designed item are not returnable for any reason.
|
|
