Custom Tables and Projects
This page will show you some of the projects and products we are working on from start to finish across the nation.
The first project we are working on is the Maryland Hotel (Ivy Hotel now) Roof Top Fire Pit in downtown San Diego, California on the 7th floor roof top!
It measures 60" across, 30" tall and 144" long!
The fire table/ fire pit will and a 5' x 12' surface top in smooth concrete with a 16" x 120" stainless steel fire tray of to one side. We will post pictures as the project grows on.
Te fire pit is constructed with a new flexible track and about 3,000 screws, 240' of galvanized channel, 450 welds, 600 lbs of GFRC/ Wonder Board and coated in smooth texture concrete.
sd 1sd 2
sd 3sd 4
sd 5sd 6
sd 7
This was just before delivery, dry fit.
sd 17
sd 18sd 19
sd 20sd 21
Once on the roof top the two halves were attached and the pan was installed
sd 8sd 9
There were two burners and two controls installed
sd 10sd 11
sd 12sd 13
sd 14sd 15
The glass is going in after the position of the fire table was adjusted. Pictures will be here soon!
If you look at the walls of the roof top you can see most of San Diego.
sd 16
The table now has had a different coat of colored concrete applied and a granite top. The glass that is installed is starfire. The Hotel plumber was not very careful as he mixed the lava with the glass and now it looks like salt and pepper. We will be taking a trip to San Diego to fix this mixing issue because we would like to post finished pictures of the fire table burning at night time.
ivy 1ivy 1a
ivy 2ivy 2a
ivy 3ivy 3a
new pit 1new pit 2
new pit 3new pit 4
new pit 5new pit 6
new pit 7new pit 8
new pit 9new pit 10
new pit 11new pit 12
new pit 13new pit 14
The fire pit shown above is from www.FireScapes.net .
 

The propane conversion was here in Southern California. Crista brought the bowl and we did the rest.

crista 5crista 6

Crista brought the top pan and lid and we installed a propane burner We installed one of our FPPK kits (fire pit propane kit)

crista 2crista 3

crista 1cb 7

This is the table Crista built to hold the copper pan/ bowl

cb 1cb 2

The fire pit/ table is at the Roxbury Hotel and we will show you the progress here from beginning to end. This was a propane installation with our FPPK burner. The colors used were:
1/4" starfire, 1/2" starfire, gold, Lime Green Topper, Pale Olive Green Topper, Olive Green Topper,a little bit of wood and tile and here you go!
roxbury 4roxbury 5
Above shows the framing and the gas line coming in.
Below shows the pipe coming out of the floor and the thermo-coupler on the glass next to the igniter
roxbury 6roxbury 8
roxbury 7
roxbury 7a
roxbury 2roxbury 1
roxbury 3
Roxbury Hotel, a cool fire pit!
The fire bowl below is one of our newest products/ projects. The first one went to Ramsey Burton in Kentucky of which after he installs it is his ten foot granite table we will show you pictures of his project. This is a 48" spun aluminum bowl with a 24" center bowl with a water feature with fibre optics. The outer bowl has a stainless steel ring for a full surround fire feature. So here are the first proto-type pictures from the shop.
f1f2
f3f4
f5f6
f7f8
f9f10
These pictures show what happens when it gets darker as the fire is attracted to the water. Opposites attract, maybe this is why most of us are still together. The question is" Who is the FIRE?"
f11f12
f13f14
No we add the fibre optics in the center bowl.
f15f16
f17f18
f19f20
The glass we used was our multi mix. At least 80 colors are showing.
f21f22
f23f24
f25f26
f27f28
f29f30
f31f32
f33f34
f35
You can change the water head for a different effect.
f36
f37f40
f39
f41
We are going to be showing this for the first time in Palm Springs on December 06 2007 on Thursday evening at the Village Fest. This is just a base you would build your table around and we can add any feature or effect you would like. We will be adding several features to this fire/ water feature in the next few weeks. We will be posting pictures from the Village Fest after the first showing. If you dream it, we will build it.
Here are some pictures of our newest fire and water tables. These were made in conjunction with TC Products. The fire feature won the HPBA Vesta Awards in Georgia this year 2008. Unfortunatly they fogot to mention our name? I'm sure they didn't mean to do this. The vortex fire is one of our newest creations this year.
TC 2
TC 3
TC 5
TC 6
TC 7
This is a propane fueled Vortex Fire from our collection and design room.

What?
The Vesta Awards were created by Hearth & Home magazine to recognize and honor companies for their innovation in product design and/or technology.

Where?
Awards will be presented at an industry-wide ceremony on Friday, February 29, 2008.

The reception and awards program will take place from 5:00-6:30 pm. at the Georgia World Congress Center, Atlanta, GA.

More details here:

http://hearthandhome.com/vesta/vesta.html

 

The fire table below is at the Ivy Hotel downtown San Diego. There was an 8' fire pit installed there as well by one of our dealers on top of the Ivy Hotel. If your ever down to San Diego you must visit the Ivy Hotel. www.IvyHotel.com

Below are the pictures of our fire table and the new fire pit being installed on the 7th floor. Cesar did a great job!

ivy 1

ivy 2

ivy 3

ivy 4

ivy 5

ivy 6

ivy 7

ivy 8

ivy 9

ivy 10

ivy 11

ivy 12

ivy 13

ivy 14

This is the burner we built for this fire pit:

The burner below is installed in San Diego California. This is a 4 burner stainless steel custom. It is turned on by 4 valves and measures 72" across which is in an 84" fire pit. We will post pictures of the finished project when we finish it.
72 burner 172 burner 2
72 burner 372 burner 4
72 burner 572 burner 6
72 burner 7
We will show you all four burners burning and we will also have the pictures and location for you of the finished project as soon as we can. As we have said before, there is nothing we can't do or build!

 

 

"Utility Patent Applications now Published as of June 2005 and May 2006"

We are still in Patent Pending

We take pride in our new product and take Patent Infringement very seriously! There are several companies who have copied our product and or process and they will be in for a surprise when our patent number becomes available to the public.

Please take note that in the United States reasonable royalties begin to accrue when a
Patent publishes, (as ours has in June of 2005 and in May of 2006) depending on the state of the patent application at the time of issuance.
Please take note that we do intend to enforce our patent rights to the furthest extent
of the law upon issuance of our patent.

Patent publication available on request. Don't be fooled by look-a-likes or overly expensive imitations, ask for Aquatic Glassel by Moderustic. Be sure to get a price quote and you'll see the difference.

We are now designing a national catalog which should be 30 to 50 pages! We are asking for your help in acquiring pictures of fireplaces and fire pits for our catalog that our glass was used in. We would also appreciate your comments and or feed back as well. Please send your e mails and pictures to:
Ed@Moderustic.com
Jaunzemis@msn.com

Copyright 2005 www.Moderustic.com All Rights Reserved.
Copyright 2005 www.AquaticGlassel.com All Rights Reserved.

Click here to view our website's sitemap!

Any questions please contact us at:
Phone: 909 989 6129


Fax: 909 944 3811
E Mail:
Ed@Moderustic.com

Stop by and visit our Showroom in Rancho Cucamonga:
Moderustic Inc.
9467 Ninth Street #D
Rancho Cucamonga, California 91730

CSLB# C-17 693887

We are 2 miles north of the Ontario Airport
Hours: M-F 8:00 to 6:00 Most Saturdays 10:00 to 2:00.
After hours appointments available on request.
If you're coming late, please call and we will wait.

We at Moderustic and Producers of Aquatic Glassel and the inventors of Fireplace Glass, are proud to offer the consumer over 450 products and we know we have spawned a few undesirable competitors in the market place but we continue on our quest for betterment and greater success through you the customer. We have been criticized for offering the crushed lava rock and or filler method by all of these other companies. But we understand the wants and needs of the customer, you. Spend less and get more. Some of these companies are telling the consumer to not use filler, why? They only want to fill their pockets with your money and we want you to save money. We know we have devastated these companies with our filler saving methods but it is with the best intentions for the consumer in mind. We have refused to sell to these individuals and companies because of their business practices. So please understand their intentions when they want you to purchase more glass. We take pride in our new product and take Patent Infringement very seriously! There are several companies who have copied our product and or process and they will be in for a surprise when our patent number becomes available to the public and they will find their business in ruin. If you are a previous or new customer and would like to add your comments on these companies or your experience, we will post a testimonial page for these to be read by the public. If you would like to post just your comments, they are welcome as well. Again, we work for the consumer and not the competition.










Moderustic Return Policy
  • Returns must be made within 30 days of purchase with exceptions only by management.
  • Returned products must be unused and/ or unmixed.
  • Returned products must be packaged well to avoid damage in transit, OR YOU WILL BE RESPONSIBLE FOR THE DAMAGE.
  • Returned products that are damaged in transit will not be able to be refunded.
  • Refunds will be made towards product cost only.
  • Refunds will not be given for non-product labor costs (consulting fees, installation fees, labor, shipping etc.)
  • Restock fees may apply depending on which items are being returned. (10% to 70%)
  • Refunds are processed after customer’s review and acceptance of refunded amount.
  • Refunds take approximately 1 week for processing less any customer delays.
  • Any return must have a return authorization in writing by the management and this will be noted.
  • There are no returns or refunds on any custom metal products what so ever!
  • We are not responsible for local codes and or if any of our products are or are not approved. Please check with your local building department or governing agencies for proper approvals before purchasing. Custom build or designed item are not returnable for any reason.