There will be more details and pictures to come in the next 3 weeks as this is how long it will take to complete this trailer. This is the next step for several dealers who are are waiting on the completion of this Mega Trailer!
The Fireplace below belongs to Candice, Jonathan and Rocky (a cute little Yorkie). We converted a plain fireplace to a much more usable and modern fireplace TV entertainment area. Watch the transformation from beginning to end. We topped it with Starfire to finish it off.
Below is Rocky, just supervising
We started the metal framing in 16 Gauge steel studs. No wood was used and you should never use wood near a fire.
Below we wrapped the opening with durock, concrete board.
Add a bit of drywall.
This was wired for a surround sound and electrical in the left cabinets.
The TV that was used was a DPL (16" deep) and this is how you install a TV that is not a flat screen above your fireplace. In the left cabinets the components were installed and concealed by black glass doors. On the top we installed a set of 6" lights on dimmers to give additional room/ mood lighting.
The two fire tubs below were for the Anaheim Marriott in California. The two stainless steel surrounds were installed into the rock fire pit to conceal the
electronic ignitions. They had placed logs on top.
These can be made in any size or shape.
The fireplace below was installed with a dual battery operated 100,000 BTU propane electronic ignition system. Each capable of 100,000 BTU's of fire. The first pictures show what we had to work with and how it progressed.
If this was in your house you would say NASTY!
Burning wood and logs is just nasty and dirty! True story!
Above you can see the soot that come out of the fireplace and and leaves your house smelling so carbon monoxide fresh! YUCK!
Add a bit of lime stone.
A few pieces of copper.
Below you can see the sand bed and the ignition box we built.
Below are the two vent we installed for the air mixers inside of the ignition systems.
and here we are finished. Now isn't that much better litter feller?
Modern times call for modern measures! I guess that's why we are Moderustic!
The burner below is one of our FPPK's (fire pit propane kit). With this FPPK we set it up for Black Magic! This was table tested for the pictures. Hopefully the customer will send us pictures after and during installation. We first sent these pictures for the customers approval. Here you go!
This is one of our propane pan burner with slight modifications.
As you can see around the lower edges it was leaking and yes we did fix this.
The fireplaces we are about to show you are
Sterling Silver Coated panels we have developed. No they are not just mirrors! (try it and let us know what happened). We are now working on a template procedure to send the customer to help us properly fit each panel. The first set of pictures are from David Barron in Southern California.
You can see the flames reflect off of the side and back walls from the
sterling silver coated panels.
.
Well if you ever thought of doing this, we now can! We pride ourselves in being the first in creativity, design, innovation and customer service. Most of our ideas and creations will be copied, but many months later we are at that time are already on our 2nd or 3rd generation product line anyway. Imitation is the highest form of FLATTERY! Thank you, no really Thank you! Our drive is to satisfy the customer with creativity and ingenuity.
We will be posting more pictures when they are available. Please send your thoughts on our ideas and product developments, we really do appreciate your thoughts.
Ed
The fireplace below is in Santa Monica California. The fireplace is a Malm Fireplace which can be found at:
or
We used an 18" double stainless steel burner and a bed of Starfire topped with a few pounds of our Ice Ice Ice.
This is a very simple self installation as you will see.
The fire pit below is in San Francisco California. They use one of out FPPK units.
Here you can see the simple construction.
A local artist made the glass inlay top. Very cool!
We supplied the FPPK and the Clear glass
The fireplace below is a direct vent fireplace in Arroyo Grande (Pismo Beach, California). We mounted the back and then attached the face. This surround was with out a perimeter of interior glass. We usually border a 2" band of glass all around the inside edge. We use aluminum for this project.
This is the standard black frame for the fireplace.
Below you can see the back of the surround attached to the fireplace.
Then we just slip the front cover over and done!
This unique fireplace belongs to Dawn Westlake. She used a Clear base glass with 1/2" Chunky Clear, New Yellow, V Blue, V Blue Reflective, Pale Steel Blue Topper and Citrine Topper. The fireplace turned out spectacular! Great Job!
The fire pit below is a custom fire pit in Covina California with one really great back yard design. This back yard was designed for great parties. If you look and see the glass wall with the etching you will also see the fire pit in the back ground. The glass that was used:
Gray and
Clear Pyrite base glass,
Gold Reflective,
Copper Blue Topper This is one really good looking table.
