Propane Burner Self Installation

The fireplace below is a propane burner, self installation with the 2" method, starfire and gold on top

jr 1jr 3

Above we have the old burner with a smaller flame pattern which we will change to a double burner in our tray propane pan burner

jr 5jr 4

A little bit of cleaning with a wire brush and 1200 degree paint

jr 6jr 7

We filled the bottom with pea gravel and the covered it with sand

jr 8jr 9

Then we installed the propane burner and filler it with pea gravel to the top of the burners

jr 10jr 11

You can see the pilot light and thermo-coupler exposed

jr 12jr 13

So there it is. A clean burning propane burner, 2" method, no soot, no smells, no carbon monoxide and it puts out a tremendous amount of heat. We sell the 2" method because it works and if anyone tries to tell you different, they need your money more than you do. We are the only company building propane burners for glass that don't soot or smell!

The vent less burner below is 1 of 3 that were sent to Georgia. The glass that we tested was multi mix. We show the burner finished, with the burners exposed, burning and with glass, We will post the pictures of the finished fireplace when the customer send them to us to post. This is a propane vent less burner and these also are made in natural gas as well.
tj 11tj 10
tj 9
Notice the stainless box tray underneath the upper pan.
tj 1tj 2
tj 3tj 4
tj 5tj 6
tj 7tj 8
tj 13tj 14
tj 15tj 16
tj 17
tj 12
If you dream it, design it, think of it, we can build it as we are the innovators in the industry which seem to some how give licence for most to try to copy us and our products and designs. What is important that you know who we are!
The vent less burner below is made of steel and there were actually 4 of these made. We covered the front and sides with 5" skirts. There are being installed in Georgia and as soon as they send pictures we will post them These pictures were taken just after the testing. This is a propane vent less burner and these are available in natural gas as well.
vent less 1vent less 2
vent less 3vent less 4
vent less 5vent less 6
vent less 7
The pictures below are of the same burner as above with Azurlite installed. These 4 vent less burners are being installed in Georgia.
v 5v 7
v 8v 9
v 10v 11
v 12v 6
v 13
The skirts will hide the the valves and the remote control will be moved to the side of the fireplace. This was a vent less burner the customer sent to us for conversion and they asked for us to add a remote to all 4 vent less burners.
The fire pit/ table is at the Roxbury Hotel and we will show you the progress here from beginning to end. This was a propane installation with our FPPK burner. The colors used were:
1/4" starfire, 1/2" starfire, gold, Lime Green Topper, Pale Olive Green Topper, Olive Green Topper,a little bit of wood and tile and here you go!
roxbury 4roxbury 5
Above shows the framing and the gas line coming in.
Below shows the pipe coming out of the floor and the thermo-coupler on the glass next to the igniter
roxbury 6roxbury 8
roxbury 7
roxbury 7a
roxbury 2roxbury 1
roxbury 3
Roxbury Hotel, a cool fire pit!
These fire pits below are in Mexico at the 4 Seasons Resort which we supplied the product. But they didn't listen when we told them about propane and how to install it correctly! This is a result of male ego and I can do it myself better! NOT! The second mistake was a SCREEN under the glass as this can and will trap gases which wil cause woofing. A small fire ball every few minutes which can scare the crap out of you and every one around the fire feature. If you don't like your neighbor, well anyway.
bad 2abad 1a
bad 2bad 1
This has been fixed and now works and looks fine. We will post pictures as soon as they send us the new pictures. We can fix any issues created by d___ies, so please be careful on who is selling and or telling you what.
The 9 pictures below are of a steel propane vent less burner. We used the original burner and installed an air mixer under the pan to insure a clean burn. As you will see the thermo-coupler, pilot light and ODS (oxygen depletion sensor are intact). These pans can be made in any shape or material.
vp 1vp 2
vp 3vp 4
vp 5vp 6
vp 7vp 8
vp 9
What ever burner you purchase with or without remote control, we can convert it for you. Propane or natural gas, vented, direct vent or vent less as shown.

The fireplace below is a propane self build and installed by Norm Oppplinger in St. Louis. It has a 1/4" starfire base with 1/2' starfire on top and topping with:

Light Aquamarine topper

Turquoise blue topper

Cerulean Blue topping

Copper blue topper

Scarlett topper

Ice Ice Ice

and a few of our diamonds

one great propane self install Norm!

norm 1norm 2

norm 3norm 4

norm 5norm 7

norm 12norm 8

norm 9norm 10

norm 11

The fireplace below has a propane burner under all of the sand, clear ice and black luster topper.
mitch 1mitch 2
mitch 3mitch 4
mitch 5mitch 6
mitch 7mitch 8
mitch 9mitch 10
mitch 11mitch 12
mitch 13mitch 14
The fireplace below is a propane pan burner with a lava rock fill. You don't want to crush your own lava rock because of the time. You can use larger lava around the edges of the pan but you will want to use crushed lava in the pan up to the surface of the burners. The glass use in this fireplace was a ford blue base with ford blue reflective on top. Topped with clear pyrite and amber accents. The install went very well except for the rock crushing episode.
jm 1jm 2
jm 3jm 4
jm 5jm 6
jm 7
The fireplace below was installed by the customer (Kim Clark) with a remote control, propane burner manufactured by us and topped with starfire. The fireplace was transformed form an ordinary to work of art, nice job!
kim 2
kim 3
kim 5
kim 6
kim 7
kim 8
The picture below has the burner being tested
kim 9
This is the remote control on the lower right with the pilot light assembly
kim 1
We now have fire!
kim 10
kim 11
kim 12
kim 13

The round pan below is a propane pan with electronic ignition. This is a 36" aluminum pan with a 2" lip all around

round aluminum pan 1

round aluminum pan 2

round aluminum pan 4

The two pans below are stainless steel and are propane fueled with 415,000 btu electronic ignitions each.

twin propane fire pans 1twin propane fire pans 2

twin propane fire pans 3

 

 

 

"Utility Patent Applications now Published as of June 2005 and May 2006"

We are still in Patent Pending

We take pride in our new product and take Patent Infringement very seriously! There are several companies who have copied our product and or process and they will be in for a surprise when our patent number becomes available to the public.

Please take note that in the United States reasonable royalties begin to accrue when a
Patent publishes, (as ours has in June of 2005 and in May of 2006) depending on the state of the patent application at the time of issuance.
Please take note that we do intend to enforce our patent rights to the furthest extent
of the law upon issuance of our patent.

Patent publication available on request. Don't be fooled by look-a-likes or overly expensive imitations, ask for Aquatic Glassel by Moderustic. Be sure to get a price quote and you'll see the difference.

We are now designing a national catalog which should be 30 to 50 pages! We are asking for your help in acquiring pictures of fireplaces and fire pits for our catalog that our glass was used in. We would also appreciate your comments and or feed back as well. Please send your e mails and pictures to:
Ed@Moderustic.com
Jaunzemis@msn.com

Copyright 2005 www.Moderustic.com All Rights Reserved.
Copyright 2005 www.AquaticGlassel.com All Rights Reserved.

Click here to view our website's sitemap!

Any questions please contact us at:
Phone: 909 989 6129


Fax: 909 944 3811
E Mail:
Ed@Moderustic.com

Stop by and visit our Showroom in Rancho Cucamonga:
Moderustic Inc.
9467 Ninth Street #D
Rancho Cucamonga, California 91730

CSLB# C-17 693887

We are 2 miles north of the Ontario Airport
Hours: M-F 8:00 to 6:00 Most Saturdays 10:00 to 2:00.
After hours appointments available on request.
If you're coming late, please call and we will wait.

We at Moderustic and Producers of Aquatic Glassel and the inventors of Fireplace Glass, are proud to offer the consumer over 450 products and we know we have spawned a few undesirable competitors in the market place but we continue on our quest for betterment and greater success through you the customer. We have been criticized for offering the crushed lava rock and or filler method by all of these other companies. But we understand the wants and needs of the customer, you. Spend less and get more. Some of these companies are telling the consumer to not use filler, why? They only want to fill their pockets with your money and we want you to save money. We know we have devastated these companies with our filler saving methods but it is with the best intentions for the consumer in mind. We have refused to sell to these individuals and companies because of their business practices. So please understand their intentions when they want you to purchase more glass. We take pride in our new product and take Patent Infringement very seriously! There are several companies who have copied our product and or process and they will be in for a surprise when our patent number becomes available to the public and they will find their business in ruin. If you are a previous or new customer and would like to add your comments on these companies or your experience, we will post a testimonial page for these to be read by the public. If you would like to post just your comments, they are welcome as well. Again, we work for the consumer and not the competition.










Moderustic Return Policy
  • Returns must be made within 30 days of purchase with exceptions only by management.
  • Returned products must be unused and/ or unmixed.
  • Returned products must be packaged well to avoid damage in transit, OR YOU WILL BE RESPONSIBLE FOR THE DAMAGE.
  • Returned products that are damaged in transit will not be able to be refunded.
  • Refunds will be made towards product cost only.
  • Refunds will not be given for non-product labor costs (consulting fees, installation fees, labor, shipping etc.)
  • Restock fees may apply depending on which items are being returned. (10% to 70%)
  • Refunds are processed after customer’s review and acceptance of refunded amount.
  • Refunds take approximately 1 week for processing less any customer delays.
  • Any return must have a return authorization in writing by the management and this will be noted.
  • There are no returns or refunds on any custom metal products what so ever!
  • We are not responsible for local codes and or if any of our products are or are not approved. Please check with your local building department or governing agencies for proper approvals before purchasing. Custom build or designed item are not returnable for any reason.