| This page is for fire pits and you will find some very unique fire pits here in the near future. Starting with this one! The details will follow in a few days about this fire pit.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
The fire pit below has Ford Blue, Ford Blue Reflective, V Blue, V Blue Reflective, Turquoise Toppings, Deep Royal Toppings and Copper Blue Topper on a bed of 1/4" and 1/2" starfire
 
THESE WILL BE OUR NEWEST FIRE PITS WITH GRANITE TOPS AND OF COURSE GLASSEL IN THE FIRE PIT AND YOUR CHOICE OF COLOR. THESE WILL BE NATURAL GAS OR PROPANE BOTTLE FUELED. WE WILL POST MORE DETAILS IN A FEW DAYS.
 
 
 
The fire pit/ fire table has blue and blue reflective in the center.
This is a 4 piece glass surrounding a fire pit.
The pictures below are of a self install fire pit with crushed lava rock and a clear base
1/2" to 3/4" lava rock is use just to the bottom of the ring.
If you want a higher center then pour a little more filler on top of the ring.
Now we will pour the crushed lava rock (1/4" to 3/8") over the filler as this will stop the glass from falling through the lava rock.
Finish shaping and pour the glass
This is a 36" fire pit which requires 56 lbs for a 1" cover and 80 lbs for a 1 1/2" cover.
We used the 1" method, 56 lbs which as you can see works just fine and no you can't see though the glass.
The second step will be to add color and toppers which we should post in a few days and night time pictures with the fire on
Here we are showing you how to properly install a fire pit with glass whether you are using a 1”, 1˝” or even the 2” method. The less glass over the crushed lava rock the more likely someone can disturb the top layer and then the lava rock could show through. We recommend starting with less and then you can always add more if you need to. As you can see we had our customer do the 1” method and it looks just fine. Now he is going to add toppers for accents and color. Don't be fooled by someone trying to get you to purchase more than you actually need. Give us a call and we can help guide you in the right direction
The fire pit below has a clear base with azurlite and ford blue on top. Then it was topped with Dark Red Orange Topper, Yellow Amber Topper and Amber Topping.
A simple fire pit with Azurlite below
This fire pit has clear, chunky clear, starfire and 1/2 starfire and a water fall going into the fire, pretty cool!
The fire pit below was a traditional lava rock fire pit
 
Now filled with lava rock (crushed 1/4" 3/8") over 3/8" 1/2" crushed. Remember the larger is under the smaller to keep the glass from falling through.
 
Above a flex line was installed to raise the ring to the surface. You don't want to leave the ring at the bottom unless you want an explosion or if you want to get rid of the significant other.
Below
Pour more crushed lava to make the desired shape of the fire pit and test burn for flame pattern.
 
Starfire base and a few other colors were added
Azurlite, Scarlet Topper, Red Topping, Ice, Copper Blue Topper, Copper Blue is a chameleon as when it gets hot it turns green and when it cools it turns back to blue!
 
Patterns, can you do better?
Pretty creative!
 
 
 
Great job and very creative.
 
The 4 pictures are of Multi mix in a simple but nice fire pit. Multi mix is off of our test table in the showroom which everyone who comes in can sample mix their fireplace glass and after the table fills up we then have multi mix. There is usually a lot of toppers and toppings in the multi mix.
The fire pit below is in Boise! It has
Evergreen and Reflective
Azurlite and Reflective
Ford Blue and Reflective. Looks great.
Makes me want to go to Boise!
The fire table below has 1/2 chunky clear, amber and pink rosa.
The pictures below are from the Lure Lounge at the Wynn in Las Vegas. This was done for Steve Wynn with all gold. This was taken without the flame on and when we return we will have pictures of the fire pit lite up
Wynn Las Vegas
3131 Las Vegas Boulevard
Las Vegas, Nevada 89109
Phone: (702) 770-7100
Website: www.wynnlasvegas.com
Another site with a nice picture of the pit (two pictures down from the top).
 
 
Starfire installed below
The indoor fire table below has:
Bronze, black, emerald green, reflective green, black reflective and gold
 
The fire pit below has a clear base with 1/4" starfire and 1/2" starfire, Yellow Amber Topper. Cobalt Blue Topper and Emerald Green Topper. The earth as the back yard and a lot of friends, wow!
 
 
 
The fire pit below has a half round 4 piece stainless steel ring custom made to fit the shape of the fire pit.
 
The tables below were made for the Marriott in Boise Idaho
Marriott Hotel Boise Idaho
This is a pro-to type fire table that when finished will be wrapped in wire and finished in smooth high heat concrete mix with a 48" fire bowl in the middle. There will be a 6" brushed metal finished edge to cover under table lights. The table is 60" wide and 24" tall. These will be delivered to Boise Idaho, Marriott Corp. We will post finished pictures as soon as we can.
A brushed finish 8" edge was added along with a touch sensor to turn the lights on under the table. It is a 3 position sensor (high, medium and low).
Now the high heat concrete is applied and shaped.
As it turns out there is a 36" triple ring under the lava rock and we are down sizing it to a 24" double ring. As you can see when the wind blows the fire get a little bit close to the edge.
If you had a drink near the edge it would be a little bit warmer now. The sides will be dropped about 3 inches and the center raised about 3" and a 24" ring will finish it off. We will post the pictures of the glass and ICE when it is installed in a few days.
Here are the finished table pictures We use clear base with lots of our ICE ICE ICE!   The fireplace below has Bronze, Bronze Reflective , Ice Ice Ice and Clear Diamonds The Fire pit/ Fireplace is in the entry, pretty cool.                 The first project we are working on is the Maryland
Hotel (Ivy Hotel now) Roof Top Fire Pit in downtown San Diego,
California on the 7th floor roof top!
It measures 60" across, 30" tall and 144" long!
The fire table/ fire pit will and a 5' x 12' surface
top in smooth concrete with a 16" x 120" stainless steel fire tray of
to one side. We will post pictures as the project grows on.
Te fire pit is constructed with a new flexible track
and about 3,000 screws, 240' of galvanized channel, 450 welds, 600 lbs
of GFRC/ Wonder Board and coated in smooth texture concrete.
This was just before delivery, dry fit.
Once on the roof top the two halves were attached and the pan was installed
There were two burners and two controls installed
The glass is going in after the position of the fire table was adjusted. Pictures will be here soon!
If you look at the walls of the roof top you can see most of San Diego.
The table now has had a different coat of colored concrete applied and a granite top. The glass that is installed is starfire. The Hotel plumber was not very careful as he mixed the lava with
the glass and now it looks like salt and pepper. We will be taking a
trip to San Diego to fix this mixing issue because we would like to
post finished pictures of the fire table burning at night time.
Below is just a nice propane fire table with multi mix
 We will be posting different ideas on fire pit covers we can build or design for your fire pit. This
fire pit is in Pasadena California. The base is ford blue and v blue
topped with both colors in reflective. Then we topped it with cobalt
blue topper, copper blue topper and lagoon topper. Then we made a
simple tie cover to keep the pit looking great all of the time when it
is not in use. The
fire pit below is in the Palace of Qatar and this was commissioned for
the King of Qatar. The fire pit is a propane/ butane fueled fire pit
and it was installed by Gasco
of Qatar. They didn't understand the glass so they opted to use lava
rock. Now they (the King) have ordered the glass and if we can get the
pictures we will post them. We did propane for the King and there are no issues! Awesome marble!
|
HOME 
ABOUT US 
CLIENT ACCESS
