CLICK HERE TO PURCHASE IN THE E-STORE!
CLICK HERE TO PURCHASE IN THE E-STORE!
Norm Bougie had this outdoor table that he felt needed some new life. So instead of building a custom fire table from scratch, Norm applied some creative tile work to his old table top and we constructed a custom 18" Aluminum round pan with a
12" Double Burner Ring and filled with
1/4" Starfire fireglass.
A great table resurrection!
Phil's fireplace had a few issues which we helped correct.
- The original Paint job was patchy / spotty
- Paint was not in the back right vertical seam, showed metal
- Front top center was not painted at all
- And he was originally sold a $162.75 stainless steel burner, which was unnecessary. All he needed was a double 18" steel burner for $69.25. Its the equivalent of taking a canon to go duck hunting!?
Corey B. wanted an electronic ignition for his fireplace, and though one could think that an IPI for a fireplace could go in a fireplace...I would seriously advice not to do it!!!
Suffice it to say it melted.
The pictures below demonstrate what had been initially done, that is, the electronic ignition system wrongly placed within the fireplace.
We worked with Corey on how to best conceal the IPI. And in the end it was ingeniously installed within the left wall of his fireplace. Safely and discreetly placing it somewhere that it could work properly and not be intrusive and most importantly NOT MELT!!!
Cory decided that he wanted a lot of color in his new fireplace, he used the following fireglass and fire crystal toppers:
1/4" Starfire
Tucker from Texas re-did both fireplaces, first his formal living room with 1/4" Starfire, 1/2" Starfire, Gold and a few Diamonds.
And his Great room with Gold and Amber.
The fireplace below was installed in Palm Springs, California. The base glass is Starfire and then we topped it with 1 lb of Pirates Topper.
This is a typical fireplace but this one has lava rock stacked up inside, yuck!
Below you can see the flame hitting the back wall creating a soot mark, not very nice looking. The customer didn't want the fireplace painted, why?
There's that soot mark! If you do paint make sure the work is not spotty! That looks nasty as well.
Above you see the typical hard piped burner installed which is fine for logs or lava. But this does not really work well for glass.
Below you see the double burner installed with an 18" flex line.
Test the burner and pour the glass, now it looks nice except for the soot mark!
The fireplace below has a base of Bronze with Bronze Reflective and Starfire on top.
This is the back side of the peninsula fireplace.
The fireplace below has a Starfire base and several Toppers for color:
Pink, Cobalt Blue, Fuchsia, Hyacinth, Amethyst, Pale Cobalt Blue, Aquamarine, Lilac, Steel Blue and Purple.
CLICK HERE TO PURCHASE IN THE E-STORE!
Now we added a surround to finish it off. If you look on the lower right there is a remote control which is hidden by the surround.
Before Starfire and Gold
After Starfire and Gold
Starfire with Amber on top
Starfire with Red, Orange and Medium Amber
Azurlite with Starfire above
Starfire above and below
Bronze base with Bronze Reflective topped with Starfire
above and below
CLICK HERE TO PURCHASE IN THE E-STORE!
Below is a fire pit with a Clear base with Azurlite and Starfire on top
Fireplace on Red Hill, Andre Silva, just a nice fire, no pan.
The fireplace picture above has a Clear base glass
Below we covered it with a Starfire base glass.
Not only is this cost effective, it is a simple change.
This is the same fireplace as above, but we changed it to Starfire and
added an aluminum frame with a special glass.
Again the same fireplace by evening.
By late evening with the glow of the new glass.
CLICK HERE TO PURCHASE IN THE E-STORE!
The fireplace above is a nice fireplace with Starfire and below we added a new Surround frame
The 5 pictures below are a Starfire base with Deep Royal and Medium Amber on top
The 5 pictures above are a Starfire base with Deep Royal and Medium Amber on top
The 5 pictures below are all Starfire in Newport Beach, California
The 5 pictures above are Starfire
The five pictures below are a Starfire base with Ford Blue, Ford Blue Reflective, and V Blue Reflective
and as you can see most fireplaces start very drab.
logs are now gone
below sand and lava rock are poured over the burner
The five pictures above are a Starfire base with Ford Blue, Ford Blue Reflective, and V Blue Reflective
The 6 pictures below are of an antique coal basket using Bronze, Bronze Reflective and Starfire
The 6 pictures above are of an antique coal basket using Bronze, Bronze Reflective and Starfire
The bottom 3 pictures are of a new fireplace surround, Starfire, Pink and Plum
The several pictures below are of a modern coal basket of stainless steel with legs or it can be suspended with chains. This will also be one of our new product lines available in several sizes and finishes. The colors used were Starfire and Clear Pyrite over Bronze.
The pictures below have Ice on the right and Starfire on the left.
The fireplace below has been painted with our red paint and Starfire.
The fire pit below has Starfire and Azurlite in the center and topped with more Starfire. This fire pit has a 6" band of white rock all around the edge. This way uses less glass and costs less.
The fireplace below has Starfire and then Black was added after the fireplace surround was installed.
We are now starting a page for some of our television promotions we have sponsored this season.
The first is:
Zen-Inspired Master Bedroom
Here are a few pictures and the rest can be seen on the link above.
This fireplace has:
1/4 Clear, 1/4 Starfire, 1/2 Clear, 1/2 Starfire, Medium Amber Topping and Topper, Red Topping and Topper and Orange Light Topper
We will be posting several television spots as soon as we have the time.
The fireplace below started out a little bland and with a little metal work, nice.
Starfire and Red Topping.
The fire pit below has Clear, Starfire, Medium Amber Topping, Yellow Amber Topper and Dark Red Orange Topper.
The fireplace below has an aluminum surround and Starfire in Palm Springs.
The fireplace below was hand made by one very creative customer, great job! It has a Starfire base and Clear Pyrite added to the surface for a little sparkle.
The pictures below we will be showing how to do a 3" install (all glass), a surround painted black and a triple burner with Ice and Starfire.
Above and below are a typical of what most fireplaces look like (yuck)
Above and below with a triple burner, some cleaning and a little bit of paint.
Above and below we installed an aluminum surround painted black. Only Starfire is installed for now.
It's hard to see but we did install Ice on top of the Starfire. If you noticed we had to pile a small mound in the front to cover the massive pipe connection. Did you even notice it in the first few pictures?
With the surround it make the room. We are proud of our inventions and ideas because our customers are always pleased.
The fireplace below has a larger surround and Starfire installed. Please note the this surround is the metal shell only without the inner frosted glass.
The fire pit below has Ford Blue, Ford Blue Reflective, V Blue, V Blue Reflective, Turquoise Toppings, Deep Royal Toppings and Copper Blue Topper on a bed of 1/4" Starfire and 1/2" Starfire
The fireplace below has a Starfire base with Red Toppings, Red R Toppers, Scarlet Red Toppers and Ice.
The pictures below are of a Starfire base with Black Reflective on top.
THESE WILL BE OUR NEWEST FIRE PITS WITH GRANITE TOPS AND OF COURSE GLASSEL IN THE FIRE PIT AND YOUR CHOICE OF COLOR. THESE WILL BE NATURAL GAS OR PROPANE BOTTLE FUELED. WE WILL POST MORE DETAILS WHEN WE HAVE A CHANCE.
The 6 pictures below show a self install with all glass using the original burner which didn't have a bad flame pattern. 1/8" Clear was used as a base and then Starfire was added to the surface saving money and it did look great. It's a simple as that.
The fireplace below has a base of Starfire and topped with Dark Red Orange.
The 6 fireplace pictures below have Starfire, Amber and a surround. This is in Texas and is a customer install. Very nice Rodney.
The cool kitchen fireplace below has Starfire and looks really nice in the kitchen. The burner was too close to the back wall and sooted the wall up. Be sure to not let the flames hit the walls as this will cause soot.
This fire pit has Clear, Chunky Clear, Starfire and 1/2 Starfire and a water fall going into the fire, pretty cool!
The fire pit below was a traditional lava rock fire pit
Now filled with lava rock (crushed 1/4" 3/8") over 3/8" 1/2" crushed. Remember the larger is under the smaller to keep the glass from falling through.
Above a flex line was installed to raise the ring to the surface. You don't want to leave the ring at the bottom unless you want an explosion or if you want to get rid of the significant other.
Below
Pour more crushed lava to make the desired shape of the fire pit and test burn for flame pattern.
Starfire base and a few other colors were added
Azurlite, Scarlet Topper, Red Topping, Ice, Copper Blue Topper, Copper Blue is a chameleon as when it gets hot it turns green and when it cools it turns back to blue!
Patterns, can you do better?
Pretty creative!
Great job and very creative.
The fireplace below has Starfire and Ice. This is a complete makeover and turned out very nice.
Boise International Airport
Fire Water feature in the lobby/ food court
This fire pit featured Starfire surrounded by water. We only did the glass and the burners were by another company.
Three Public Art Projects Selected for Boise Airport
BoiseCity Council has approved the selected artists to design and build an art glass fireplace with Aquatic Glassel, a cast and fused glass wall feature, and a fabric mural for the new buildings of the Boise Airport. Art projects will complement the modern, curvilinear architecture inspired by Idahos natural resources.
Project: Fireplace/Water Feature Artists: Lawrence Ko and Ray Ahlgren from Portland, Oregon and Moderustic of Rancho Cucamonga, California
Budget: $155,000 Site: Food Court in New Terminal Completion: September 2004
Sponsored by: Boises Percent-for-Art, Aviation and Public Transportation Department
A fireplace made of glass (Aquatic Glassel) with a surrounding water basin feature inspired by the stepped landforms of the Boise Riverbanks and nearby reservoir will act as a beacon of light within the new food court area. Sited below a skylight, the fireplace will be a focal point and gathering space for travelers.
The fireplace below is in Georgia and we will explain as we move down
The first 2 pictures are of how it used to look, nice logs! I don't think so!
The owners of this fireplace called and told us they couldn't use the fireplace because of the soot (carbon monoxide) (poison) So we redesigned the fireplace with an air vented pan and our glass (Starfire and Ice) and now a clean burn! The flames are all above the glass and therefore no more carbon-monoxide. Fireplace Shops and dealers won't tell you about this unless you ask, how would you know to ask?
Starfire and Ice on the left
Pan and ring burner on the right.
Really nice fireplace in the middle of the great room surrounded by 3 glass walls.
The fire pit below has a Clear base with 1/4" Starfire and 1/2" Starfire, Yellow Amber Topper. Cobalt Blue Topper and Emerald Green Topper. The earth as the back yard and a lot of friends, wow!
The fire pit / fireplace below has a Starfire base with Red and Red Orange on top. It is a low flame which produces this blue flame effect.
CLICK HERE TO PURCHASE IN THE E-STORE!
The fireplace below has Starfire and a clean simple look
The pictures below are of a self install with:
1/4" Bronze and 1/2" Bronze, 1/4" Starfire and 1/2" Starfire
Red R Topper
Red Topping and about 1 lb of Scarlet Red Topper.
The fire table below has a
propane burner and is not configured correctly. That is why you will see soot (carbon monoxide) the black stuff on the glass. If you purchased a table from one of these clowns that have you connect a propane tank to a burner ring, you will have problems. We use all the proper safety valves and air mixers to insure a clean and safe burn.
See our propane page. We are the only company manufacturing a propane burner that is safe and built correctly for these fire tables when you are using our glass. The glass used was
Starfire and
Pale Copper Blue Topper. Since and after the install we did supply the correct burner and it is burning clean as it should be.
As you can see after burning for about 10 minutes the soot is and will be an issue. Carbon Monoxide IS NOT GOOD FOR YOU!
The fireplace below is in Glendale Hills, California. We installed
Starfire as a base with about 1 lb of
Ice Ice Ice on top. Then to finish it off we installed a
brass surround with Bronze frosted glass. The customer loved it! She is the CEO of Fredrick's of Hollywood! Awesome house by the way.
