Bronze Rust Copper Base Glass

The fireplace below is a self install with a bed of crushed lava and on top we have:

1 double 24" burner

5 lbs of 1/8" Solex Base Glass

5 lbs 3/16 Amber Base Glass

5 lbs Bronze Rust Copper Base Glass

1 lb of Pink Diamonds

and 1 lb of Rhubarb Pink G278CF Topper

and painted with clay tan paint

For a lava fill n the base it needs to be back at least 4" so when you pour the glass on you won't see the lava through the glass. Yes they did move the lava back after they e mailed the pictures to us to see if they were doing it right.

The fireplace below is a Malm Carousel Fireplace. We replaced the attempted dual burner which it was originally installed with with a simple 12" steel ring.

This fireplace has a safety pilot light kit which was still left intact for local code reasons but we did get rid of the non functioning pan burners.

Below we poured the crushed lava base up to and just covering the ring burner.

Then we poured the Bronze Rust Copper Base Glass over the ring and crushed lava rock.

With the doors closed just enough as you can see now they can control the hurricane/ tornado effect!

Azurlite Reflective Base Glass and Gold Base Glass were added to the Bronze Rust Copper Base Glass

 

The fireplace below has Bronze Rust Copper Bas eGlass, Ford Blue Base Glass and Yellow Amber Topper

 

The surround below was built for Stacey in Laguna Niguel, California. She requested distressed copper which she got. From the edges on the interior being welded and polished to the antique distress. The surround looked great against the faux painted walls. The glass that was used was Bronze Rust Copper Base Glass.

We typically start with a card board template to replicate the size and shape of the fireplace surround. This is a preview of your surround as this eliminates any surprises!

 

The fire pit below belongs to Chad Haupert. He used an Azurlite Base Glass with Azurlite Reflective Base Glass on top. Then he created a star in the center using Bronze Rust Copper Base Glass with and outline of Ice Ice Ice Topper. We didn't get pictures of the complete pit nor of it burning. But it looks great!

 

 CLICK HERE TO PURCHASE IN THE E-STORE!

The fireplace below is from Steve Calderon and he used a Starfire Base Glass with Gold Base Glass and Bronze Rust Copper Base Glass on top.

This is from beginning to end.

Above is the before believe it or not. As you can see Steve did a terrific job. This was a wood burning fireplace before. he installed a gas line and control valve on the right side.

Below you can see the old burner which we replaced with the new double 18" burner.

Mask it, vacuum it after wire brushing the walls clean.

A bit of Thermolux 1200 degree high heat paint.

Fireplace Glass used:

Pour in a Starfire Base Glass with a splash of Gold Base Glass and Bronze Rust Copper Base Glass on top.

.

Then you have one nice fireplace, great job!

The fireplace below is a direct vent conversion. The most important issue to address here is to NEVER increase the amount of fuel that your fireplace was designed to burn.

We will explain as we move forward:

This is the burner in this particular direct vent fireplace.

This burner will work just fine.

 

Nice Logs? Isn't that the WOW! factor you were looking for?

Now we add Bronze Rust Copper Base Glass with Gold Base Glass on top.

You tell me, which looks better?

CLICK HERE TO PURCHASE IN THE E-STORE!

The fireplace below is a self installation by Thom Toben of Studio T2 Designs in Kansas. & colors were installed and they are;

Clear Base Glass with Starfire Base Glass mixed together over

Medium Amber Topping

Bronze Rust Copper Base Glass

Black Luster Topper

Yellow Amber Topper and

Turquoise Blue Topper

You be the judge, we think it looks great!

Below the burner is installed with the flex line under the burner

Now the lava goes in and the burner is brought up to the surface

Test the burner to insure the flame don't hit the back wall.

The Clear Base Glass and Starfire Base Glass was poured on top of the lava.

Then Thom placed all of the other selected to match the room.

 

The next few pictures are from New York by Jai Crandall for Tom Morgan. We can hep transform an eye soar to a place of enjoyment. Just watch!

November 10, 2009
Hello Ed, my name is Jai Crandall and I live in central NY.  I have a good friend (Tom Morgan) that has a patio that he generally uses wood to throw some heat for his quests when he entertains.  Unfortunately, as I'm sure you know, the smoke can really get to you after a while. This is a very high end home and he entertains for some very important people.  He would like to eliminate the wood a replace them with some propane inserts. It doesn't have to look like a fireplace, but most importantly, it needs to throw some intense heat.
    Pictures 1,2 and 3 are the front views of the fire pits and as you will notice they are not square ( each picture is labeled with the dimensions), they don't need to stay like they are, so if you want to make them square you can. Just go by the front measurement. Hopefully you can design something that will fit there needs.
    I am sure that they are going to want electric ignition, and you can try to place the control valves in the front. Also, with the good New York weather, you want want to have covers for each unit.       
    Thank You so much for your time and I look forward to working with you to complete this project.
 
Jai Crandall
July 3, 2010
 Now here are the finished pictures on the property. Very nice!
Hey Ed,  Here are some pictures of the burners that I installed. They look great and they are very happy with their performance. Also, I believe that I may have a few more people interested in something similar to what I did for Tom Morgan.  Have a great forth weekend and I will talk to you soon.
 
Jai

That's what I said when I first saw the project, YUK!!!! I tried to figure out what to do????

Jai came up with the Stainless Steel hollow base design and we went to work.

This is a happy ending!

 

Our propane burners were set to 100,000 btu's each for maximum heat. The glass that we used was Bronze Rust Copper Base Glass.

First here is what your fireplace may looks like now, nasty!

We reconfigure the pilot, burner, base plate, venturi and get it to burn properly.

Nice flames, then we continue.

If you look below we are showing you proper pilot light placement.

Paint is and you're done!

The glass that we used was a Starfire Base Glass, Bronze Rust Copper Glass and Bronze Reflective Base Glass on top.

If your fireplace does not work this easy or look this simple, then we didn't do it!

Let us help you make your fireplace work right and look good.

 

 

 CLICK HERE TO PURCHASE IN THE E-STORE!