FireGlass , fire glass, fire glass, fireplace, fire pit, modern fireplaces fire pits, https://www.moderustic.com
Moderustic Aquatic Glassel Fireplace Glass Rocks Propane FireplacesModerustic Aquatic Glassel Fireplace Glass Rocks Propane Fireplaces

Ed@Moderustic.com 909 989 6129

1/4" Clear Base Glass

CLICK HERE TO PURCHASE IN THE E-STORE!

This is another 1/4" Clear page as the first one is large enough!

1/4 clear 1

1/4 clear 2

 

 

14 clear 3

14 clear 2

14 clear 1

 

 

clear 3

clear 2

clear 1

 

14 clear 1 300 

14 clear 300

14 clear 2 300

clear 20clear 30


12 clearclear 10

3/16 clear 300

CLICK HERE TO PURCHASE IN THE E-STORE!

The fireplace below has Clear, Gray, Black, Clear Pyrite and Topped with 1/2" Starfire.

 



_____________________________________________________________________

Click "HERE" or on the picture below to see how this started and finished, very simple and very nice

Ken Beauvais Fireplace_____________________________________________________________________

The fire pit below has a 1/4" Clear, 1/2" Clear base with Red Orange Topping, Emerald Green Topping and Light Sky Blue Topping. The was a basic wood burning fire pit purchased locally and converted with our fire pit propane kit (FPPK)

 



The fire pit below has a Clear base with 1/4" Starfire and 1/2" Starfire, Yellow Amber Topper. Cobalt Blue Topper and Emerald Green Topper. The earth as the back yard and a lot of friends, wow!



CLICK HERE TO PURCHASE IN THE E-STORE!

The tables below were made for the Marriott in Boise Idaho

Marriott Hotel Boise Idaho
marriot 1
This is a pro-to type fire table that when finished will be wrapped in wire and finished in smooth high heat concrete mix with a 48" fire bowl in the middle. There will be a 6" brushed metal finished edge to cover under table lights. The table is 60" wide and 24" tall. These will be delivered to Boise Idaho, Marriott Corp. We will post finished pictures as soon as we can.
marriot 3
A brushed finish 8" edge was added along with a touch sensor to turn the lights on under the table. It is a 3 position sensor (high, medium and low).
Now the high heat concrete is applied and shaped.
As it turns out there is a 36" triple ring under the lava rock and we are down sizing it to a 24" double ring. As you can see when the wind blows the fire get a little bit close to the edge.
If you had a drink near the edge it would be a little bit warmer now. The sides will be dropped about 3 inches and the center raised about 3" and a 24" ring will finish it off. We will post the pictures of the glass and ICE when it is installed in a few days.
Here are the finished table pictures
We use Clear base with lots of our ICE ICE ICE!


 

The fireplace below has a 3" layer of crushed lava, 1/4" Clear base, 1/2" Starfire, 3/4" Starfire for the chunky look and a flush surround to finish it off. A very impressive and modern house and fireplace. From beginning to end, here we go.

n 1n 2

We also floated the walls to level the fireplace and get it ready for the surround.

A little bit of granite on the floor

n 3n 4

If you notice to the right there is no valve to turn it on? The plumber from a few years ago has it to the right about 5 feet, DUMMY! Lets fill the fireplace with gas before we get there and see what happens! Don't hire that plumber.

n 1n 2

We are now going to do an extended 3/4" glass radius counter in the kitchen in front of the stove for a glass counter top.

n 3n 4

n 5n 6

We also bent all of the kitchen handles to contour the cabinets.

n 7n 8

n 9n 10

n 11n 12

n 13n 14

n 15n 16

n 17n 18

n 19n 20

Now you can see the fireplace valve to the right.

n 21n 22

We flush fit a surround to the wall for a final finish. This was a satin black aluminum frame with 2" of glass installed

n 23n 24

CLICK HERE TO PURCHASE IN THE E-STORE!

We are capable of any size project from design to a full installation (depending on our current work load). There is nothing we can't do as we are the the first and foremost authority in our field. We never say NO! We do only what the other companies can only dream about!

Ed

 

The 2 outdoor fireplaces below are in northern California at the Hyatt. They called us about soot on the glass. When we looked at the pictures our first thoughts were PROPANE! No these are natural gas. The fix was actually very simple. This was caused by a down draft from the chimney which we partially closed the flue which stopped the down draft and as you can see they are just fine now.
hyatt 1ahyatt 1
hyatt 2ahyatt 2


The fireplace below is a direct vent fireplace located in Palm Springs California at Palm Springs Modern Homes. www.PSMHomes.com . We have done over 60 of these installs in the condo complex and they all are outstanding! For those of you who say it can't be done, well here is is. Just because you don't know how doesn't mean it can't be done.
mh 12
mh 5
mh 4
mh 3
mh 2


CLICK HERE TO PURCHASE IN THE E-STORE!
The fire pit and fireplace below are located at the hotel Casa 425 in Claremont California, downtown Claremont. www.Casa425.com . The fireplace had a splash of Clear base glass over a ribbon burner with a remote control for a simple but elegant look.
The fireplace is just inside the front doors as you enter to greet you.
casa 1
casa 2
casa 3
casa 4
casa 5
CLICK HERE TO PURCHASE IN THE E-STORE!

The fire pit below is also at the hotel Casa 425, www.Casa425.com and is in the court yard at the hotel. There are 2 of the fire pits and they are 60" x 60" x 20" tall and they are powder coated black with a Clear base glass installed over an 18 round stainless steel ring.
casa pit 1
casa pit 2
It's like Where's Waldo, can you spot the 2 fire pits below?
casa pit 3
casa pit 4
casa pit 5
casa pit 6
casa pit 7
casa pit 8

CLICK HERE TO PURCHASE IN THE E-STORE!
The next fire pit was designed by and built for Kevin Leys of Chicago. He did a great job and you decide.

First he started with a single wall construction fire box with a pan on the top

k1

k2

Then it was framed for exterior plywood or you could use metal studs and wonder board.

k3

The gas valve was located to the outer framed wall

k4

k9

k5

k6

k7

This is a natural gas fire pit. It was tested as soon as it turned dark, fun!

k8

k10

k11

k12

Now we add the crushed lava rock and glass over that. There are many sub materials you can use as a filler. Just ask.

k13

k14

Great back yard by the way! Chicago, remember?

k19

k20

Now we start to apply the tile for the finishing touch.

k15

k16

k17

k18

k21

k22

k23

k24

CLICK HERE TO PURCHASE IN THE E-STORE!

The fire pit below is in Glendale, Arizona at the Renaissance Hotel. We installed an electronic ignition with a 30" stainless steel ring. The glass use was a Clear base with Starfire on top and topped with 42 lbs of Apricot Topper. These pictures were taken with the edges still exposed which were covered by a layer of Starfire.

katz 1

katz 2

 

 

The fireplace below is a propane fireplace with a propane burner and remote control. We used a Clear base with Starfire on top. Then we added:

Medium Amber Topping,

Yellow Amber Topper,

Steel Blue Topper,

Dark Red Orange Topper over the base glass. The controls were covered after the install was finished. If you look closely you can see the pilot light assembly.

w 3

w 1

w 2

w 4

w 5


We have over the last few years helped design and and sold dozens of custom fireplaces. The one here was installed in Beverly Hills, California. We designed the fireplace, custom candle pan burner with electronic ignition. We used a Clear base glass for a simple a modern look. We will be posting the pictures as we have time in the near future.
daniel 1
We did the fireplace not the white onyx. What we did does not show but it's what made the fireplace what it is, designED !
daniel 3
daniel 4
daniel 6
daniel 7
If you take the time to notice the nice texture of the glass. It's because we tumble it (patent pending) that's what also make us and our glass different from anyone else.
daniel 8
daniel 9
daniel 13

CLICK HERE TO PURCHASE IN THE E-STORE!
The fireplace below is a propane fireplace. A bed of crushed lava was installed and a Clear base glass was used to cover it all up.
Step 1, paint it!
pat 1
Step 2, cover the old brick!
pat 2
Finish the face and floor, very nice!
pat 3
Install the propane pan burner
pat 4
Fill in and all around the pan with crushed lava rock.
pat 5
On the left side you can see the gas connection which will soon be covered as well. On the right side the control cover will be covered as well. This propane pan burner was fitted with a remote control, radio frequency.
pat 6
pat 7
Now that your finished your ready for FIRE! Have your spouse lite it in the event they didn't follow the instructions! (just kidding again)!
pat 8
pat 9

CLICK HERE TO PURCHASE IN THE E-STORE!
The fire pit below has a Clear base glass,
Azurlite base glass for one very nice fire pit and back yard!
fire pit 3
fire pit 2
fire pit 1

The Terra Cota pot below is fed by natural gas and was Topped with a 1 1/2" layer of Clear over a bed of crushed lava rock.

paul 1

paul 2

The gas line was drilled from the bottom of the deck and the pot was placed on top

paul 3

The fireplace below has a bed of Clear base glass with Red Topping and Red Scarlet Topper on top.  The fireplace below has a 

 red 1

red 2

 

                                                  
         
Clear base with  Blue Green and Blue Green Reflective on top.

 

 

 

debbie 1
debbie 2
debbie 3
Above and below you can see there was about 2 lbs added of our Ice Ice Ice.
debbie 4
debbie 5
CLICK HERE TO PURCHASE IN THE E-STORE!

 

 

 

 

The Fireplace below has a Clear base with Light Amber Topping.
The first pictures shows how it started and as you scroll down you can see the transformation. Very Nice!
clear 1
clear 3
clear 4

 

 

 

The fireplace below is a self install with a Hanover Red back ground, The glass that was used is a Clear base with Starfire on top. The Red and Orange Toppers were applied. Jon and Liz Kleinman even labeled their pictures for us.
 
jon 2
jon 3
jon 4
jon 5
jon 6
Then the Starfire and Toppers were added.
jon 1

CLICK HERE TO PURCHASE IN THE E-STORE!

 The fire pit below is one of several Katrina builds in the San Francisco Bay area. She will build anything thing you can imagine in here field of design. Please contact us so we an put you in touch with Katrina.
The fire pit below she used a Clear base glass.
katrina 1
katrina 2
katrina 3

 

 

                                                                                                    
The fire pit below is in Newport Beach California at Newport Coast Development. We replaced a hot spark ignition which did not work, with our
IPI (intermittent Pilot Ignition) electronic ignition system.  The fire pit was 18" deep and 48" across. This is what was installed:
1 =  IPI Electronic Ignition for Natural Gas connected to a 1" gas line
1300 lbs crushed lava
144 lbs Clear base glass for a 2" fill over the crushed lava
36" triple stainless steel burner ring
We will show you from beginning to end:
newport 1
Looked pretty nasty  when we got there
newport 2
newport 3
We started to pour the crushed lava with our electronic ignition being raised to the surface by the lava rock
newport 4
newport 5
We built a double box to protect the equipment in the fire pit as well
newport 6
The ring is now installed
newport 7
The electronics  can be accessed if ever there was a failure of the equipment and you can access it from the surface. Before the equipment was 20 inches below the surface, not a very good idea!
newport 8
Now we poured the 144 lbs of Clear base over the crushed lava
newport 9
We only did the fire pit, not the view. That came with the home. But one very impressive view!
newport 10
newport 11
newport 12
newport 13
newport 14
newport 15
newport 16
newport 17
newport 18
As you have looked at all of our pictures we would like you to know we use Crystals as our Toppers and Toppings. We don't use "Recycled" glass, ever! We are actually the only company that produces Crystals for fireplace and fire pits.
newport 19
newport 20
We tried to get pictures of it burning, but the flames just didn't show. Look above and you can see a flicker in the daylight. Actually the flames were over 16" tall but you can't see this in daylight.The contractor will get a few night pictures when they and if they can. 
newport 21
CLICK HERE TO PURCHASE IN THE E-STORE!
 
 
The fireplaces we are about to show you are Sterling Silver Coated panels we have developed. No they are not just mirrors! (try it and let us know what happened). We are now working on a template procedure to send the customer to help us properly fit each panel. The first set of pictures are from David Barron in Southern California.
david barron 1
david barron 2
With the doors open (optional) you can see the Clear base glass.
david barron 3
david barron 4
You can see the flames reflect off of the side and back walls from the Sterling Silver coated panels.
david barron 5
david barron 6.
david barron 7
Well if you ever thought of doing this, we now can! We pride ourselves in being the first in creativity, design, innovation and customer service.  Most of our ideas and creations will be copied, but many months later we are at that time are already on our 2nd or 3rd generation product line anyway. Imitation is the highest form of FLATTERY! Thank you, no really Thank you! Our drive is to satisfy the customer with creativity and ingenuity.
david barron 8
 
We will be posting more pictures when they are available. Please send your thoughts on our ideas and product developments, we really do appreciate your thoughts.
Ed
Ed@Moderustic.com
 
 
 

The fire pit below is in San Francisco California. They use  one of out FPPK units. 

Here you can see the simple construction.

moxie fire pit 1

A local artist made the glass inlay top. Very cool!

moxie fire pit 2

moxie fire pit 3

moxie fire pit 4

We supplied the FPPK and the Clear glass

moxie fire pit 5

CLICK HERE TO PURCHASE IN THE E-STORE!

  This unique fireplace belongs to Dawn Westlake. She used a Clear base glass with 1/2" Chunky Clear, New Yellow, V Blue, V Blue Reflective, Pale Steel Blue Topper and Citrine Topper. The fireplace turned out spectacular! Great Job!  
 

 

dawn 3

dawn 2

dawn 1

The fireplace below has a steel pan underneath to conceal the 12 volt remote control. We used a Clear base glass and topped it with a Starfire base glass and then added Amber Diamonds on the surface.

Jim Malless 1

Jim Malless 2

Jim Malless 3

You can see the front plate that was painted to match which is removable if and when necessary to change the batteries. The legs were 4 1/2" and the pan was 2" tall. The removable front metal curtain was 6 1/2" tall.

Jim Malless 4

Jim Malless 5

 
 

The fire pit below is located in San Diego, Gable Point Loma. There were 2 electronic ignitions installed and a false bottom was installed. We filled the base with Clear base glass and 1/2" Clear base glass.The lines were installed from the back.

Gables Point Loma 1

Below are the electronic ignitions.

Gables Point  Loma 2

Gables Point Loma 3

Framing/ metal studs were installed and two layers of durock was then installed to support the glass.

Gables Point Loma 8

Gables Point Loma 7

Gables Point Loma 6

Finished!

Gables Point  Loma 5


The stove below had a set of logs installed, yuk! We used the original burner and just raised the thermo coupler to the surface of the glass. The glass will get to about 700 to 750 degrees in about an hour burning at 80,000 btu's. We used a Clear base glass, Lagoon Topper and a few Clear Diamonds and Pink Diamonds.

Rob Alger 1

Rob Alger 2

Rob Alger 5

Much nicer than LOGS! No Really!

Rob Alger 4


The fireplace below is a self installation by Thom Toben of Studio T2 Designs in Kansas. & colors were installed and they are;

Clear base with Starfire base mixed together over

Medium Amber Topping

Bronze Rust Copper base glass

Black Luster Topper

Yellow Amber Topper and

Turquoise Blue Topper

You be the judge, we think it looks great!

Thom Toben 6

Below the burner is installed with the flex line under the burner

Thom Toben 4

Now the lava goes in and the burner is brought up to the surface

Thom Toben 5

Test the burner to insure the flame don't hit the back wall.

Thom Toben 2

The Clear and Starfire base glass was poured on top of the lava.

Thom Toben 7

Then Thom placed all of the other selected to match the room.

Thom Toben 1

Thom Toben 9

Thom Toben 8

Thom Toben 9

Thom Toben 3

CLICK HERE TO PURCHASE IN THE E-STORE!

The next fire pit was build/ constructed by Rose Harms in Wyoming. Long story behind this one with what the plumbers were telling her and what actually happened.  We will explain as we go.
Rose Harms 1
Above and below you can see we had her install a gas line with a quick disconnect hose.
Here is what Rose had to say:
Hi Ed and Claudia,
Wanted to be sure I got the photos to you of our completed fire pit.
Here are the steps we went through:
 
Bought the brick/blocks (no lip on the stones) from Lowe's, put in circle, 3 rows high.
Bought the iron fire pit at Lowe's and placed on and inside fire pit.  -note -it is iron, so I sprayed it with HIGH HEAT paint, in Copper.  Wow!
got plumber to run natural gas from deck above (outlet for BBQ) and under the deck, ran down the deck post and he put in a Shut Off valve there.
It turns.
He ran a precise hole through the bottom off the fire pit to hold pipe for gas to the double ring burner (from Moderustic of course) and it is stainless
steel (no rust).  At the bottom of the deck post is a flexible hose which goes over to the fire pit.  It CAN be disconnected or even roll up and
shove inside fire pit (after it is cooled).
 
Note: you do need to chop off a piece of the block, or else just pull one out when you are using the
fire pit. (Kind of like Jenga -just pull out the stone, the others support the fire pit) Unless you can successfully saw off a piece of the stone.
 
Lit the burner to be sure it works well.  It did.
 
We put in the 1" lava rock in the bottom of copper fire pit and then filled in the spaces with 1/4" lava rock.  Should have used More!  When we went to
cover the burner we were short on the fireglass.  So we ordered more. Still looks beautiful.
 
Got rest of glass and made circles with the glass and it is beautiful.  There are photos of it burning last night!!  Lots of warmth on a typical
cool Wyoming evening.
 
Brick: $200,  Fire Pit $79 on sale,  double ring SS burner $126,  glass -about $250, gas line -don't know yet but guessing $200.  Maybe $750-800 total.
And -the way it is made, we could actually dismantle and move it.  No mortar in stones.   We are very happy with our fire pit and thanks to Ed and the gals
at Moderustic, we were able to make the right choice for glass and burner.  Thanks Ed, Rebecca and Claudia.  Very knowledgeable and helpful.  Could not have managed
this without your guidance.  We love being DYI-ers but directions are needed!!  We appreciate all your help. 
 
Rose and Doug Harms, Cheyenne Wyoming
Rose Harms 8
Mind that the customers stacked their own bricks!
Rose Harms 5
Rose Harms 6
Rose Harms 7
The glass that was used:
and the rest is history!
Rose Harms 3
Rose Harms 4
Rose Harms 9
Rose Harms 10
This was originally going to be propane but if you have natural gas, then use it if you can. It will cost less in the long run.
Rose Harms 11

The fire pit below was built and designed by Brett Parks in Indiana.  Brett came to us to help hm create his water fire feature for his back yard and be able to winterize it during their frigid winters. The glass he used was a:
We then built a custom shape stainless steel burner to fit his idea. We will explain as we go.
Here is his original concept drawing:
Parks 11
Below is his layout with pavers, electrical and gas line coming up.
Parks 1
6" deep water tank.
Parks 2
Parks 3
Stack a few more pavers.
 Parks 4
Let's test it!
Parks 5
Parks 6
A custom size and configuration ring was fabricated.
Parks 7
Now you are done!
Parks 8
Parks 9
Parks 10
CLICK HERE TO PURCHASE IN THE E-STORE!
The four combinations below were requested by a customer so we did the mock ups and send them the pictures.
Clear Evergreen Lime Green 1
Clear Evergreen Lime Green 2
Clear Evergreen Lime Green 3
Clear Evergreen Lime Green 4
Clear Lime Green 1
Clear Lime Green 2
Clear Lime Green 3
Clear Lime Green 4
Clear Pale Olive 1
Clear Pale Olive 2
Clear Pale Olive 3
Clear Pale Olive 4
Clear Evergreen Pale Olive 1
Clear Evergreen Pale Olive 2
Clear Evergreen Pale Olive 3
Clear Evergreen Pale Olive 4

The next surround was installed in Palm Springs, California for Marsha Dashefsky. The base glass was a 1/4" Clear and then we added 1/2" Clear and 1/2" Starfire. Marsha decided she wanted a Brushed Aluminum from floor to ceiling. Well, she got it. We are now in the process of making a template / surround for just the opening. The next several pictures are of and with the blinds open and with the lights of. The aluminum can take on may soft or brilliant looks depending on the lighting. Take a look.

Marsha-Palm-Springs 1

Above and below is what we started with.

Marsha-Palm-Springs 2

Marsha-Palm-Springs 3

Marsha-Palm-Springs 4

Marsha-Palm-Springs 5

Marsha-Palm-Springs 6

Marsha-Palm-Springs 7

Different lighting, different looks.

Marsha-Palm-Springs 8

Marsha-Palm-Springs 9

Marsha-Palm-Springs 10

Marsha-Palm-Springs 11

Marsha-Palm-Springs 12

CLICK HERE TO PURCHASE IN THE E-STORE!
                                      
The next fire pit was created by Mike. He used a metal flower pot/ planting tub and just connected it to his gas line. He installed
Clear base glass and Gold on top.
Mike 1
You can see the logs just outside of the pan on the left, yuk! I personally would of installed a ring burner, but that is just me!
Mike 2
But you have to admit, it is a good idea!
Mike 3
Mike 4

CLICK HERE TO PURCHASE IN THE E-STORE!

The next set of fireplace pictures are from Jim Malless. We made a 4" tall pan and installed a battery operated  remote control under the pan. The pan has a removable front face to conceal the components. The glass that he installed is:

Starfire base,

Clear base under the Starfire, (more cost effective)

and a few Amber Diamonds!

Jim Malless 1

Jim Malless 2

Jim Malless 3

These pans are built to fit each fireplace one at a time. Yours will be made just for you.

Jim Malless 4

Jim Malless 5

The next fireplace installation was by Vito Sanfilippo. He installed a propane pan and topped it with:
and added
Bronze base to accent the top.
Here we go:
YUK, no paint...
Vito Sanfillippo
Paint makes a world of difference.
Vito Sanfillippo
Vito Sanfillippo
Pan and glass installed
Vito Sanfillippo
Vito Sanfillippo
Small fire
Vito Sanfillippo
and if Vito wants a big fire, Vito gets a big fire!
Vito Sanfillippo
and his wife said, no I want a small fire, guess who won?
Vito Sanfillippo







Win Wuttke
Super "8" Stainless Steel Pans! Custom made just for you, check it out!

______________________________________________________________________________________________

We will show you how it came to life, CLICK on the picture below or HERE.

Colleen Clark Fire Table

CLICK HERE TO PURCHASE IN THE E-STORE!

 

Ed@Moderustic.com 909-989-6129

9467 9th street Unit D

Rancho Cucamongs, California 91730

 

Our Glass is SAFE and See Why!

Safe Glass
 We  Appreciate Your Comments & Feed Back. Please
Send Your E-mails or Click HERE to Submit a Survey!



909-989-6129  Fax: 909-944-3811 
or E-mail us at
Ed@Moderustic.com |  Jaunzemis@msn.com  

Ed@Moderustic.com 909-989-6129

9467 9th street Unit D

Rancho Cucamongs, California 91730


 
Moderustic Aquatic Glassel Fireplace Glass Rocks Propane Fireplaces