CLICK HERE TO PURCHASE IN THE E-STORE!
CLICK HERE TO PURCHASE IN THE E-STORE!
Here is a fireplace before and after with Clear Base Glass and a splash of Ice ice Ice Topper
This next self install is a 10 picture install with :
Azurlite Base Glass, Clear Base Glass, Blue Green Base Glass, Blue Green Reflective Base Glass, Ice Clear Topper, Ice Blue Topper. Very nice fireplace.
The fire pit below was a traditional lava rock fire pit
Now filled with lava rock (crushed 1/4" 3/8") over 3/8" 1/2" crushed. Remember the larger is under the smaller to keep the glass from falling through.
Above a flex line was installed to raise the ring to the surface. You don't want to leave the ring at the bottom unless you want an explosion or if you want to get rid of the significant other.
Below
Pour more crushed lava to make the desired shape of the fire pit and test burn for flame pattern.
Starfire base and a few other colors were added
Azurlite Base Glass, Scarlet Topper, Red Topping, Ice Ice ice Topper, Copper Blue Topper, Copper Blue Topper is a chameleon as when it gets hot it turns green and when it cools it turns back to blue!
Patterns, can you do better?
Pretty creative!
Great job and very creative.
CLICK HERE TO PURCHASE IN THE E-STORE!
The fireplace below has Starfire Base Glass, Ice Ice Ice Topper and Copper Ruby Red Topper.
The fireplace below has Black Base Glass, Black Reflective Base Glass and ICE ICE ICE Topper on top
The fireplace below is a ventless with a steel pan and a stainless face added to cover the controls. The glass is Azurlite Base Glass with Ice Ice Ice Topper. Ahhhhh the beauty of no logs! Really!
Can you honestly say logs look good?
The fireplace below is a propane burner, self installation with the 2" method, Starfire Base Glass and Gold Base Glass on top
Above we have the old burner with a smaller flame pattern which we will change to a double burner in our tray propane pan burner
A little bit of cleaning with a wire brush and 1200 degree paint
We filled the bottom with pea gravel and the covered it with sand
Then we installed the propane burner and filler it with pea gravel to the top of the burners
You can see the pilot light and thermocouple exposed
So there it is. A clean burning propane burner, 2" method, no soot, no smells, no carbon monoxide and it puts out a tremendous amount of heat. We sell the 2" method because it works and if anyone tries to tell you different, they need your money more than you do. We are the only company building propane burners for glass that don't soot or smell!
above the burner goes in
below the lava goes on the burner. Then magically the lava disappears! We use the 2" method to save money not gouge the customer as we here this everyday how customers are taken by BS!
The fireplace below is in San Diego, California and the colors used were:
wow!
The end pictures show that the burner was too close the wall which was an easy fix by moving the burner forward.
This is where is went a little bit wrong, oops. We just had them move the burner forward and now its fine and the back wall was repainted.
